Find cartridges, media, fittings, instruments, tanks, pumps, valves, and application galleries by procurement and use questions. This navigation connects product information with scene observations. All images are AI-assisted illustrations. Models, performance, and engineering results require checks against authentic documentation.
Equipment, vessels, and storage provisions
- UV water treatment unit: Select UV equipment together with feedwater conditions, the target task, and the downstream system. Lamp power is not the verified performance of the complete unit.
- Diaphragm metering pump: A diaphragm metering pump serves the corresponding metering task. Selection requires a defined medium, objective, and complete supporting equipment.
- RO membrane cleaning equipment: RO membrane cleaning equipment must match membranes, chemicals, connections, and site management. Images do not provide a cleaning recipe.
- Round stainless steel water tank: Round water tank selection includes storage tasks, materials, connections, and installation conditions. The pictured exterior does not prove steel grade or volume.
- Rectangular sectional stainless steel water tank: Sectional rectangular water tanks require space, foundation, and connection design. An assembled appearance does not establish actual supply specifications.
- Clean water storage tank and venting components: Clean water storage tank configuration involves the tank, piping, venting, and operating management. The source material calls it a "sterile storage tank." This page does not claim system sterility from that name.
- Chemical solution preparation tank: Chemical preparation tanks require confirmation against the medium, preparation task, and dosing system. Plastic color does not establish material compatibility.
- Water treatment agitator: Select mixers together with the vessel, medium, and actual mixing task. Appearance does not establish speed or power.
- Carbon steel water tank: Select carbon steel water tanks for actual storage tasks, materials, and internal and external protection documentation. Large, small, and combined illustrations are not confirmed models.
- Sand filter vessel: Check sand filters together with filter media, valves, and system tasks. Tank appearance does not establish internal media or filtration results.
- Fiberglass-reinforced plastic filter vessel: FRP filter tanks may be considered as vessels for corresponding treatment equipment. Check internal materials and tasks separately.
- Bag filter housing: Select bag filter housings together with bags, seals, and operating tasks. Do not order solely by the housing material name.
- Sanitary filter housing: Sanitary filter housings must match actual applications, cartridges, and cleaning management. A product name does not prove compliance with an industry's requirements.
- Horizontal centrifugal water supply pump: Horizontal centrifugal pump selection starts with the actual supply task and system conditions. Illustrations do not provide evidence of flow, head, or power.
Cartridges, filter media, and treatment packing media
- String-wound filter cartridge: A string-wound cartridge is one type of filter cartridge construction. When purchasing, check the winding material, core, dimensions, and target filtration task together.
- Activated carbon cartridges (granular, carbon block, and post-filter types): Discuss activated carbon cartridges separately as granular-media, compressed carbon block, and post-filter constructions. Filter media and housings alone do not establish the treatment performance of the complete unit.
- Composite filter cartridge: A composite cartridge combines different treatment stages in one assembly. Identification should focus on its actual internal configuration and compatibility with the original unit.
- Pleated filter cartridges (PP, PES, PTFE, and nylon): Pleated cartridges have different materials and constructions. Check tasks separately for PP, PES, PTFE, nylon, and high-flow types.
- Anthracite filter media: Anthracite is a category of filter media. Its selection requires the actual filtration design and material documentation.
- Zeolite filter media: The applicable tasks of zeolite filter media depend on the actual material. Its name and appearance do not prove specific treatment performance.
- Anion exchange resin: Select anion exchange resin by functional type and system task. Do not confuse it with softening resin or mixed-bed resin.
- Mixed-bed resin: Check mixed-bed resin together with the corresponding system configuration. Images do not establish the mixing ratio or actual materials.
- Combined packing media: The construction and installation provisions of combined packing media must match the actual treatment design. The illustrated form does not prove performance.
- Elastic packing media: Select elastic packing media for compatibility among material, construction, arrangement, and the treatment task.
- Inclined tube settler media: The construction, material, and support layout of inclined tube settler media should be determined by the actual sedimentation task and design.
- MBBR suspended carrier media: MBBR suspended carrier media must match the biological treatment system in use. A carrier name does not establish actual operating results.
Connections, valves, instruments, and auxiliary components
- PE water purification tubing (2-fen and 3-fen trade sizes): Water purification tubing connects the corresponding equipment and points of use. Procurement must specify actual outside diameter, wall thickness, material documentation, and connection method.
- Water purification quick-connect fittings and locking clips: Quick-connect straight couplings, elbows, tees, adapters, plugs, and locking clips each serve connection tasks. Confirm connection dimensions and sealing types for each item.
- Water purification quick-connect ball valves and inlet tee valves: Select quick-connect ball valves, inlet tee valves, and pressure tank valves according to their respective connection locations and equipment tasks.
- Water purification tubing cutter: A water purification tubing cutter assists with piping installation. Selection should focus on compatible tubing materials, diameters, and blade condition.
- Water purification pressure storage tank: A pressure storage tank must match the connected water purification system. Appearance and overall volume do not establish usable water storage volume or allowable pressure.
- Water purification faucet: A water purification faucet must match the piping, countertop, and downstream use requirements. Material and connection documentation require checking.
- Water storage tank vent filter: A water storage tank vent filter must match the tank's venting task and maintenance method. The product name "sterile" in the source material is not proof of system sterility.
- Metering and dosing accessories (foot valves, injection valves, back-pressure valves, and dampeners): Metering pump accessories serve different stages. Selection must match the pump, piping, and medium.
- Online conductivity meter: An online conductivity meter requires defined measurement points, range, probe, and system connections. Its readings do not represent all aspects of water quality.
- Online pH meter: Compatibility of an online pH meter must consider the measurement point, probe, medium, and maintenance conditions together.
- Online residual chlorine analyzer: An online residual chlorine analyzer requires a defined analyte, measurement point, and instrument method. The product name is not a test result.
- Online turbidity meter: Online turbidity meters require attention to sampling, measurement points, and instrument compatibility. Interpreting values requires the corresponding measurement conditions.
- Float level switch: Float level switches must match storage, controls, and site safety conditions. Confirm output and installation relationships.
- UPVC ball valves and matching flanges: UPVC ball valves and flanges require checks of piping materials, actual dimensions, connection standards, and operating conditions.
- Water treatment butterfly valve: Butterfly valves must match piping, actuation methods, and site operating conditions. Illustrations do not establish actual nominal size or material.
- Water treatment check valve: Select check valves according to system flow direction and operating conditions. Shape alone does not establish construction or applicability.
- Water treatment solenoid valve: Solenoid valve integration includes both medium compatibility and electrical requirements. Models must match the control system.
- Sanitary clamps and gaskets: Check clamps and gaskets as a complete connection assembly. "Sanitary grade" does not replace material and validation documentation for the specific use.
- Filter tank distributors and center tubes: Water distributors and center tubes must match actual tanks, valves, and media loading designs. They are internal system components.
- Filter tank nozzles: Filter nozzles must match the corresponding filter bed or tank design. Openings and construction cannot be determined from photographs alone.
Existing products with added images
- Cartridge filter housing
- Melt-blown polypropylene filter cartridges
- RO membranes
- Ultrafiltration membranes (UF)
- Commercial water purifier with two filter housings
- Filter bags for bag filters
- Nanofiltration membranes (NF)
- MBR membranes and hollow-fiber membranes
- Activated carbon filter media
- Quartz sand filter media
- Manganese filter media
- Water softening resin
- Water softener salt
- Antiscalants
- Reducing agents
- Membrane cleaning chemicals
- Biocides
- Polyaluminum chloride (PAC)
- Polyacrylamide (PAM)
- UV lamps and quartz sleeves
- Ozone generators and accessories
- Metering and chemical dosing equipment
- Water treatment flow and pressure instruments
- Control valves for filtration and softening
- RO membrane pressure vessel
- Vertical multistage water supply pump
- Three-tank automatic filtration system
- Twin-tank filtration unit
Application, component, and maintenance galleries
- Greenhouse and Growing Water Preparation Gallery: RO Equipment, Nutrient Solutions, and Irrigation Connections
- Boiler Room Water Treatment Gallery: Softening, RO, and Makeup Water Scope
- Rural Supply and Storage Gallery: Demand, Sampling, and Maintenance Records
- Supply Equipment Room and RO Unit Gallery: Equipment Layouts and Inspection Information
- Food and Beverage Water Preparation Gallery: Water Production, Ingredient Preparation, and Cleaning Tasks
- School Water Supply Gallery: Drinking Water Points, Cafeterias, and Service Clearance
- Hospital Water Scene Illustrations: Confirm Facility Services and Specialized Tasks Separately
- Water Treatment Component Observation Gallery: Membranes, Cartridges, Tanks, and Instruments
- Commercial and Kitchen Purification Illustrations: Compact Installation and End-Use Connections
- Water Treatment Maintenance Illustrations: Distinguishing Inspection Actions from Actual Records
How to use this library
Start with the actual issue, review compatibility information and questions on the product page, then use corresponding galleries to describe connections and site conditions. Inquiry information includes raw water, application, demand, models, and missing documentation. Images do not replace evidence for testing, installation, or acceptance.
Existing complete equipment and implementation information · Equipment and consumables · Industry solutions · Contact technical personnel
Document and image sources:Compiled on October 5, 2026, from product-themed materials and their generation notes provided by the user. Images are AI-assisted illustrations, not photographs of customer projects. This page supports discussion of product categories, selection, and maintenance. Confirm specific models, performance, testing, prices, warranties, and supply scope against the relevant product documents and written agreement.